Kia Soul: Start/Stop Button Repair procedures - Button Engine Start System - Body Electrical SystemKia Soul: Start/Stop Button Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Button Engine Start System / Start/Stop Button Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the gear knob (A) from the console upper cover after pulling it out upward.

3.
Using a screw driver or remover, remove the console upper cover (A).

4.
Disconnect the indicator connector (A) and start/stop switch connector (B).

5.
Disconnect the multimedia jack connector (A).

6.
Disconnect the gear lever lamp connector (A) and wiring.

7.
Remove the start/stop button (A) after loosening the mounting screws.

Installation
1.
Install the start/stop button.
2.
Install the console upper cover and gear knob.
3.
Connect the negative (-) battery termninal.
    See also:

    Water pump Inspection
    1. Check each part for cracks, damage or wear, and replace the coolant pump assembly if necessary. 2. Check the bearing for damage, abnorma ...

    Side repeater light bulb Type B replacement
    If the light bulb is not operating, have the vehicle checked by an authorized Kia dealer. ...

    Owner’s responsibility
    ✽ NOTICE Maintenance Service and Record Retention are the owner's responsibility. You should retain documents that show proper maintenance has been performed on your vehicle in accordan ...