Kia Soul: SS-A Solenoid Valve(ON/OFF). Installation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: SS-A Solenoid Valve(ON/OFF). Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / SS-A Solenoid Valve(ON/OFF). Installation

1.
Installation is the reverse of removal.
  
•
When installing, apply the ATF oil or white vaseline to the O-ring (A) not to be damaged.

•
The gasket of the valve body gasket (A) use new one.
•
Adding automatic transaxle fluid.
(Refer to Hydraulic System - "Fluid")

•
Perform Transaxle Control Module(TCM) learning after replacing the solenoid valve to prevent slow transaxle response, jerky acceleration and jerky startup.
(Refer to Automatic Transaxle Control System - "Repair procedures")
    SS-A Solenoid Valve(ON/OFF). Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...

    SS-B Solenoid Valve(ON/OFF). Description
    SS-B solenoid valve is attached to the valve body and is an on/off solenoid valve that is used to change gears. SS-B Solenoid valve(ON/OFF) is installed at valve body. ...

    See also:

    Main Fuse Description and Operation
    Description Installed in the safety plug, the main fuse protects the high voltage circuit from overcurrent. ...

    Antenna Coil Installation
    1. Install the coil antenna and connect the 6P connector. 2. Install the crash pad lower panel. 3. ...

    Recommended lubricants and capacities
    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in impro ...