Kia Soul: Specifications - Driveshaft and axleKia Soul: Specifications

Kia Soul EV (PS EV) 2015-2020 Service Manual / Driveshaft and axle / Specifications

Specification
Motor
Joint type
Max. permissible angle
Outer
Inner
Outer
Inner
80KW
BJ#92
TJ#92
45°
21°

Tightening Torques
Item
N.m
kgf.m
Ib.ft
Front
Tire wheel hub nuts
88.3 ~ 107.9
9.0 ~ 11.0
65.1 ~ 79.6
Drive shaft coking nut
274.6 ~ 294.2
28.0 ~ 30.0
202.5 ~ 217.0
Strut assembly to knuckle
137.3 ~ 156.9
14.0 ~ 16.0
101.3 ~ 115.7
Caliper guide rod bolt
21.6 ~ 31.4
2.2 ~ 3.2
15.9 ~ 23.1
Brake caliper mounting bolt
78.4 ~ 98.0
8.0 ~ 10.0
57.8 ~ 72.3
Wheel speed sensor mounting bolt
6.8 ~ 10.7
0.7 ~ 1.1
5.0 ~ 7.9
Brake disc mounting screw
4.9 ~ 5.8
0.5 ~ 0.6
3.6 ~ 4.3
Lower arm to knuckle
58.8 ~ 70.6
6.0 ~ 7.2
43.4 ~ 52.1
Tie rod end ball joint nut
23.5 ~ 33.3
2.4 ~ 3.4
17.4 ~ 24.5
Rear
Tire wheel hub nuts
88.2 ~ 107.8
9.0 ~ 11.0
65.0 ~ 79.5
Rear caliper guide rod bolt
21.6 ~ 31.4
2.2 ~ 3.2
15.9 ~ 23.1
Rear caliper to torsion beam axle
63.7 ~ 73.5
6.5 ~ 7.5
47.0 ~ 54.2
Rear hub assembly to torsion beam axle
49.0 ~ 58.8
5.0 ~ 6.0
36.2 ~ 43.3
Disc fixing screw
4.9 ~ 5.9
0.5 ~ 0.6
3.6 ~ 4.3

Lubricants
Motor
Joint
Lubricants
Quantity
80KW
BJ
GRB006
105g (+10g/0)
TJ
SH06-VX21
140g (+10g/0)

    High Voltage Shut-off Procedures
    High Voltage Shut-off Procedure     Be sure to read and follow the “General Safety Information and Caution” before doing any work related with the high voltage syst ...

    Special Service Tools
    Special Service Tools Tool Name / NumberIllustrationDescriptionBand installer09495-3K000Used to install ear type boot bandPuller09495-33000Used to remove spider assemblyBall joint puller09568-340 ...

    See also:

    Parking Assist Sensor Schematic Diagrams
    Circuit Diagram ...

    Tail Gate Trim Replacement
       • Put on gloves to protect your hands. ...

    Charge Port Description and Operation
    Description Charge port consists of normal charge port (1) and the rapid charge port (2) in the front of vehicle. The charge starts when the ICCB or the quick charge coonnector is connected to ...