Kia Soul: Side Sill Moulding Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Side Sill Moulding Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Side Sill Moulding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Loosen the side sill moulding mounting screws.
2.
Using a screwdriver or remover, remove the side sill moulding (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Rear Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Luggage net holder (if equipped)
    To keep items from shifting in the cargo area, you can use the holders located in the cargo area to attach the luggage net. If necessary, contact your authorized Kia dealer to obtain a luggage ...

    Rear Door Latch Component Location
    1. Rear door latch ...

    Troubleshooting
    Symptom Possible cause Remedy Speedometer does not operate Cluster fuse (10A) blown Check for short and replace fuse ...