Kia Soul: Side repeater light bulb Type A replacement
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning the socket counterclockwise
until the tabs on the socket align with the slots on the lens part.
4. Remove the bulb by pulling it straight out.
5. Insert a new bulb in the socket.
6. Reassemble the socket and the lens part.
7. Connect the bulb electrical connector.
8. Reinstall the light assembly to the body of the vehicle.
Headlight, position light, turn signal light, side marker light and front fog
light bulb replacement
(1) Headlight (High)
(2) Headlight (Low)
(3) Front side marker light
(4) Front turn signal/Position light
(5) Front fog light (if equipped)
If the headlight aiming adjustment is necessary after ...
Side repeater light bulb Type B replacement
If the light bulb is not operating, have the vehicle checked by an authorized
Kia dealer. ...
See also:
Rear Pillar Trim Components and Components Location
Component Location
1. Rear pillar trim
...
CVVT & Camshaft Installation
1.
Install the intake CVVT (A) to the intake camshaft.
Tightening torque :
63.7 ~ 73.5 N.m (6.5 ~ 7.5 kgf.m, 47.0 ~ 54.2 lb-ft)
...
Curtain air bag
вќ€ The actual air bags in the vehicle may differ from the illustration. Curtain
air bags are located along both sides of the roof rails above the front and rear
doors.
They are designed to hel ...