Kia Soul: Side Impact Sensor (SIS) Description and Operation - SRSCM - RestraintKia Soul: Side Impact Sensor (SIS) Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Side Impact Sensor (SIS) Description and Operation

Side Impact Sensor (SIS) system consists of two P-SIS, installed at each center of front door modules (LH and RH), and two SIS, installed at each center of nearby pillars (LH and RH).
P-SIS or Pressure Side Impact Sensor detects pressure due to collision at its mounting location..
Side Impact Sensor is also called A-SIS as it detects acceleration.
SRSCM determines the deployment of airbag and the time of deployment based on the collision signal from the SIS at the time of collision.
    Front Impact Sensor (FIS) Repair procedures
    Removal     • Removal of the airbag must be performed according to the precautions / procedures described previously. • Before disconnecting the front ...

    See also:

    CAUTION - Conductors To prevent damage to the conductors bonded to the inside surface of the rear window, never use sharp instruments or window cleaners containing abrasives to clean the window. ...

    Ignition Coil Removal
    1. Disconnect the battery nagative terminal. 2. Remove the engine cover. 3. Disconnect the ignition coil connec ...

    Intake Actuator Description and Operation
    Description The intake actuator is located in the blower unit. It regulates the intake door by signal from control unit. Pressing the intake selection switch will shift between recirculation an ...