Kia Soul: Side Body - Body Dimensions - Body (Interior and Exterior)Kia Soul: Side Body

Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Body Dimensions / Side Body

Side Body A

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Side Body B

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Side Body C

* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ]

Front side member tooling hole (Ø20)

Fender apron upper member
tooling hole (Ø7)
Front pillar garnish mounting hole
(Ø8.5)

Front door upper hinge mounting hole
(Ø13)
Front door lower hinge mounting hole
(Ø13)
Side outer panel notch

Side outer panel notch
Side outer panel notch

Rear door upper hinge mounting hole
(Ø13)

Rear door lower hinge mounting hole
(Ø13)
Side outer panel notch
Side outer panel notch

Side outer panel tooling hole (Ø6)
Quarter fixed garnish mounting notch
Quarter fixed garnish mounting hole
(Ø6)

Quarter fixed garnish mounting notch

Side sill moulding mounting hole
(10X10)
Rear bumper mounting hole (10.5X8.5)

    Front Body
    Front Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front Body B * These dimensions indicated in th ...

    Interior
    Interior A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Interior B * These dimensions indicated in this f ...

    See also:

    License plate light bulb replacement
    1. Remove the lens by pressing the tabs. 2. Remove the socket from the lens. 3. Remove the bulb by turning it counter clockwise. 4. Install a new bulb in the socket and install the socket to th ...

    ESC operation
    ESC ON condition When the ignition is turned ON, ESC and ESC OFF indicator lights illuminate for approximately 3 seconds, then ESC is turned on. Press the ESC OFF button for at least half a ...

    Using the Tire Mobility Kit
    1. Detach the speed restriction label (0) from the sealant bottle (1), and place it in a highly visible place inside the vehicle such as on the steering wheel to remind the driver not to drive too ...