Kia Soul: Service Mode - LCD display (if equipped) - Features of your vehicleKia Soul: Service Mode

Kia Soul 2014-2019 PS Owner's Manual / Features of your vehicle / LCD display (if equipped) / Service Mode

Service Interval

Service in

Service in

It calculates and displays when you need a scheduled maintenance service (mileage or days).

If the remaining mileage or time reaches 900 mi. (1,500 km) or 30 days, "Service in" message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position.

Service required

If you do not have your vehicle serviced according to the already inputted service

If you do not have your vehicle serviced according to the already inputted service interval, “Service required” message is displayed for several seconds each time you set the ignition switch or Engine Start/Stop Button to the ON position (The mileage and time changes to "---").

To reset the service interval to the mileage and days you inputted before:

- Press the RESET button  more than 1 second.for more than 1 second.

Service in OFF

If the service interval is not set, “Service in OFF” message is displayed on

If the service interval is not set, “Service in OFF” message is displayed on the LCD display.

✽ NOTICE

If any of the following conditions occurs, the mileage and days may be incorrect.

- The battery cable is disconnected.
- The fuse switch is turned off.
- The battery is discharged.

Master Warning Mode (if equipped)

This warning light informs the driver the following situations

This warning light informs the driver the following situations

- TPMS (if equipped)
- Service reminder (if equipped)

The Master Warning Light illuminates when more than one of the above warning situations occur. At this time, the LCD Modes Icon will change from (to () to ( If the warning situation is solved, the LCD Modes Icon will be changed back to).

If the warning situation is solved, the LCD Modes Icon will be changed back to its previous icon (User Settings Mode).

    User Settings Mode
    Description On this mode, you can change setting of the doors, lamps, and so on. Door Auto Door Lock (if equipped) • Off: The auto door lock operation will be deactivated. & ...

    See also:

    Transmitter Code Registration (Using GDS)
    1. Connect the DLC cable of GDS to the data link connector (16 pins) in driver side crash pad lower panel, turn the power on GDS. ...

    Specifications
    Items Specifications Rated voltage DC 12V Operating voltage DC 9 ~ 16V Operating temperature -30° ...

    Front Strut Assembly Components
    1. Strut assembly 2. Insulator 3. Strut bearing 4. Spring upper pad 5. Coil spring 6. Dust cover 7. Bumper rubber 8. Spring lower pad ...