Kia Soul: Seat Heater (Air Ventilation) Inspection - Seat Electrical - Body Electrical System - Kia Soul 2014-2019 PS Service ManualKia Soul: Seat Heater (Air Ventilation) Inspection

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Seat Electrical / Seat Heater (Air Ventilation) Inspection

Front Seat
1.
Check for continuity and measure the resistance between terminals.

 
Connector
Resistanc
( 10%)
Cushion (C)
1-4
4.54 Ω
Back (B)
1-4
5.16 Ω
Set (A)
3-4
9.70 Ω

  
Performance of heater is the average temperature of seat surface.
The temperature of seat surface according to pushing the seat heater switch is as below.
 
Type
1st
2nd
3rd
First row seat
Cushion
(2C/35.6F)
3 Step
36C
(96.8F)
39C
(102.2F)
42C
(107.6F)
Back
(2C/35.6F)
40C
(104F)
45C
(113F)
50C
(122F)

    Air Ventilation Seat Control Unit Component Location
    1. Seat back blower 2. Seat cushion blower 3. Air ventilation seat control unit ...

    See also:

    Cargo weight
    This figure includes all weight added to the Base Curb Weight, including cargo and optional equipment. ...

    Prompt Feedback
    This feature is used to change voice command feedback between Normal and Expert modes. Select [Prompt Feedback] Set through TUNE knob On : This mode is for beginner users and provides d ...

    Transaxle Control Module (TCM). Inspection
    TCM Problem Inspection Procedure 1. TEST TCM GROUND CIRCUIT: Measure resistance between TCM and chassis ground using the backside of TCM harness connector as TCM side c ...