Kia Soul: Seat Belt Buckle Switch (BS) Repair procedures - SRSCM - RestraintKia Soul: Seat Belt Buckle Switch (BS) Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Repair procedures

Removal
1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front seat assembly.
(Refer to Body - "Front seat")
3.
Remove the seat belt buckle switch.
(Refer to Body - "Front seat belt buckle")
Installation
   
Be sure to install the harness wires so they will not pinch or interfere with other parts.
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
3.
Install the seat belt buckle switch.
(Refer to Body - "Front seat belt buckle")
4.
Install the front seat assembly.
(Refer to Body - "Front seat")
5.
Reconnect the battery negative cable.
6.
After installing the seat belt buckle switch, confirm proper system operation:
Turn the ignition switch ON; the SRS indicator should be turned on for about six seconds and then go off.
    Occupant Detecting Sensor (ODS) Description and Operation
    Description In order to make normal activation of airbag system, SRSCM detects DTC(s) for the Passenger side Body Detection System. If the seat is occupied, Body sensor detects how measuring el ...

    See also:

    Rear Wheel Speed Sensor. Components
    1. Rear wheel speed sensor 2. Extension cable assembly ...

    Front Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    Front Seat Shield Outer Cover Component Location
    1. Front seat shield outer cover ...