Kia Soul: Seat Belt Buckle Switch (BS). Removal
1. |
Disconnect the battery negative cable, and wait for at least three
minutes before beginning work.
|
2. |
Remove the front passenger seat assembly.
(Refer to Body - "Front seat")
|
3. |
Loosen the seat belt buckle (A) mounting bolt and remove the seat
belt buckle switch.
|
Seat Belt Buckle Switch (BS). Installation
Be sure to install the harness wires not to be pinched or interfered
with other parts.
1.
...
See also:
Temperature control
The temperature will increase to the maximum (HI) by pushing the button ().
The temperature will decrease to the minimum (Lo) by pushing the button ().
When turning the knob, the temperature will ...
Preset
Press the
key
~
Briefly pressing the key (under 0.8 seconds): Plays the frequency saved
in the corresponding key.
Pressing and holding the key (over 0.8 seconds): Pressing and hol ...
TPMS Sensor Description and Operation
Description
Mode of Operation
ASIC Mode
1.
Factory Mode
The factory mode is the mode that allows the TPM sensor to
transmit RF Frames and sample LF more often in the HKMC factory. The TPM
...