Kia Soul: Seat Belt Buckle Switch (BS) Description and Operation - SRSCM - RestraintKia Soul: Seat Belt Buckle Switch (BS) Description and Operation

Kia Soul EV (PS EV) 2015-2020 Service Manual / Restraint / SRSCM / Seat Belt Buckle Switch (BS) Description and Operation

Description
The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The seat belt buckle circuit operates from internal boost voltage supplied by the SRSCM, and uses chassis ground for the signal return. The buckle status shall modify the SRSCM deployment. If the buckle status is unbuckled, the corresponding pretensioner will not be deactivated.
    Side Impact Sensor (SIS) Repair procedures
    Removal Pressure Side Impact Sensor     • Removal of the airbag must be performed according to the precautions / procedures described previously. • ...

    See also:

    Relay Box (Passenger Compartment) Fuse Inspection
    1. Be sure there is no play in the fuse holders, and that the fuses are held securely. 2. Are the fuse capacities for each ...

    Hands Free Mic Inspection
    1. Disconnect the negative (-) battery terminal. 2. Remove the overhead console lamp. (Refer to Body Electrical - &quo ...

    Center console storage
    These compartments can be used to store small items required by the driver or front passenger. To open the center console storage, pull up the lever. (Type B) ...