Kia Soul: Scheduled maintenance service - MaintenanceKia Soul: Scheduled maintenance service

Kia Soul 2009-2013 AM Owner's Manual / Maintenance / Scheduled maintenance service

Follow the Normal Maintenance Schedule if the vehicle is usually operated where none of the following conditions apply. If any of the following conditions apply, follow the Maintenance Under Severe Usage Conditions.

  • Repeated short distance driving.
  • Driving in dusty conditions or sandy areas.
  • Extensive use of brakes.
  • Driving in areas where salt or other corrosive materials are being used.
  • Driving on rough or muddy roads.
  • Driving in mountainous areas.
  • Extended periods of idling or low speed operation.
  • Driving for a prolonged period in cold temperatures and/or extremely humid climates.
  • More than 50% driving in heavy city traffic during hot weather above 90°F (32°C).

If your vehicle is operated under the above conditions, you should inspect, replace or refill more frequently than the following Normal Maintenance Schedule. After 120 months or 150,000 miles continue to follow the prescribed maintenance intervals.

Owner maintenance
The following lists are vehicle checks and inspections that should be performed by the owner or an authorized Kia dealer at the frequencies indicated to help ensure safe, dependable operation of y ...

Normal maintenance schedule
The following maintenance services must be performed to ensure good emission control and performance. Keep receipts for all vehicle emission services to protect your warranty. Where both mileage a ...

See also:

Blower OFF
Push the OFF button to turn off the blower. However you can still operate the mode and air intake buttons as long as the ignition switch is in the position ON. ...

Parking Brake Cable. Installation
1. Install the parking brake cable (A). Tightening torque : 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft) ...

Electric Parking Brake (EPB) Repair procedures
Removal 1. Turn ignition OFF and disconnect the negative (-) battery cable. 2. Remove the floor console assembly.(Refer to Body - “Floor console assembly") 3. Disconnect the EPB contro ...