Kia Soul: Roof Side Moulding Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Roof Side Moulding Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Roof Side Moulding Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Take care not to scratch the body surface.
1.
Using a screwdriver or remover, remove the roof side moulding (A).
   
Replace the roof side moulding with a new one.

2.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Fender Garnish Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    Rear Cross-traffic Collision Warning (RCCW) system / Rear Cross-traffic Collision-avoidance Assist (RCCA) system
    System description Rear Crosstraffic Collision Warning (RCCW) system Rear Cross-Traffic Collision Warning (RCCW) System uses radar sensors to monitor the approaching cross traffic from the left ...

    Battery Pack Assembly Repair procedures
    Inspection     When removing the battery pack assembly to inspect the battery system, it can be connected to vehicle by using the SST 0K918-E4100, 0K375-E4100, 0K375-E4 ...

    Drive Belt Installation
    1. Install the drive belt (A). 2. Adjust tension by tightening the alternator tension adjust bolt (B) and then install the mounting ...