Kia Soul: Road warning
Hazard warning flasher
The hazard warning flasher serves as a warning to other drivers to exercise extreme caution when approaching, overtaking, or passing your vehicle.
It should be used whenever emergency repairs are being made or when the vehicle is stopped near the edge of a roadway.
Depress the flasher switch with the ignition switch in any position. The flasher switch is located in the center console switch panel. All turn signal lights will flash simultaneously.
- The hazard warning flasher operates whether your vehicle is running or not.
- The turn signals do not work when the hazard flasher is on.
- Care must be taken when using the hazard warning flasher while the vehicle is being towed.
In case of an emergency while driving
If the engine stalls at a crossroad or crossing
If the engine stalls at a crossroad or crossing, set the shift lever in
the N (Neutral) position and then push the vehicle to a safe place.
If ...
See also:
Special Service Tools
Tool Name / Number
Illustration
Description
Hog ring clip installer
09880-4F000
...
Anti-lock brake system (ABS) warning light, Electronic Brake force Distribution
(EBD) system warning light
Anti-lock brake system (ABS) warning light
This warning light illuminates:
Once you set the ignition switch or Engine Start/Stop button to the ON
position.
- It illuminates for approximate ...
Refrigerant Temperature Sensor Description and Operation
Description
Monitors refrigerant temperature in A/C duct and sends resistance data to A/C controller. (same as the thermistor)
Temperature and resistance is inversely proportioned. ...