Kia Soul: Rheostat Repair procedures - Lighting System - Body Electrical SystemKia Soul: Rheostat Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / Rheostat Repair procedures

Inspection
1.
Disconnect the negative (-) battery terminal.
2.
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel")
3.
Remove the lower crash pad switch assembly (A) by pushing it.

4.
Disconnect the connectors (A) from the lower crash pad switch assembly.

5.
Remove the rheostat switch (A).

6.
Check for intensity of rheostat switch. If the light intensity of the lamps changes smoothly without any flickering when the rheostat is turned on, it can be assumed that the rheostat is operating normally.

    Hazard Lamp Switch Repair procedures
    Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to quickly diagnose defects ...

    Fog Lamps Repair procedures
    Inspection Fog Lamp Switch 1. With the fog lamp switch in each position, make sure that continuity exists between the following terminals. If continuity is not as specified, replace the multi ...

    See also:

    Components
    1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube 5. Clutch release cylinder ...

    Jack and tools
    The jack, jack handle, wheel lug nut wrench are stored in the luggage compartment. Pull up the luggage box cover to reach this equipment. (1) Jack handle (2) Jack (3) Wheel lug nut wrench Jack ...

    Recommended lubricants and capacities
    To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in impro ...