Kia Soul: Replacement
1. |
Remove the cap (A) and remove the nuts, then remove the wiper
arm (B).
|
2. |
Remove the glue on end of both sides (A) of the hood weatherstrip.
|
3. |
Disconnect the cowl top cover nozzle hose (A).
|
4. |
Detach the clips, then remove the cowl top cover (A).
|
5. |
Install in the reverse order of removal.
|
Component Location
1. Cowl top cover ...Crash Pad
...See also:
Battery Sensor Adjustment
Battery Sensor Recalibration Procedure
After reconnecting the battery negative cable, AMS and ISG function does
not operates until the system is stabilized, about 4 hours. If di ...
Rear Glass Removal
•
In order to remove the rear glass, use the tools shown
in the following figure:
...
Alternator Specification
Alternator
ltem
Specification
Nominal output
13.5V, 110A
Speed in use
1,000 ~ 18,000 rpm
Voltage regulator
IC Regulator bu ...