Kia Soul: Replacement - Back-up Lamp Switch - Manual Transaxle System - Kia Soul 2014-2018 PS Service ManualKia Soul: Replacement

Second generation PS (2014-2018) / Kia Soul 2014-2018 PS Service Manual / Manual Transaxle System / Back-up Lamp Switch / Replacement

1.
Remove the air cleaner assembly.
(Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery")
3.
Disconnect the back up lamp switch connector (A).

4.
Remove the back up lamp switch (A).

5.
Replace a new one and install the back up lamp switch.

Tightening torque:
39.2 ~ 58.8 N.m (4.0 ~ 6.0 kgf.m, 28.9 ~ 43.4 lb-ft)

    Inspection
    1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner") 2. Remove the battery and battery tray ...

    See also:

    Cooling Fan Inspection
    Fan Motor 1. Disconnect the fan motor connector from the resistor. 2. Connect the battery voltage to the "+" terminal and ...

    Blower Resistor (Manual) Inspection
    1. Measure the resistance between the terminals. 2. The measured resistance is not within specification, the blower resistor must be replac ...

    Registering your vehicle in a foreign country
    If you plan to register your vehicle in a foreign country, you should confirm that it conforms to the regulations in that country. Even if you successfully register the vehicle in a foreign countr ...