Kia Soul: Repair procedures
Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove engine room under cover.
(Refer to Motor System - "Under Cover") |
3. |
Remove the horn (A) after disconnecting the mounting bolt and connector. |
Installation |
1. |
Install the horns after connecting the horn connectors. |
2. |
Install the engine room under cover. |
Inspection |
Test the horn by connecting the battery voltage to terminal 1 and the ground to terminal 2.
The horn should sound normally. If not, replace it.
Components and Components Location
Component Location
1. Horn switch2. Horn relay (EMS box)3. Horn 4. Clock spring
...
See also:
Seat cooler (Air ventilation seat)
The temperature setting of the seat changes according to the switch position.
• If you want to warm your seat cushion, press the switch (red color). • If you
want to cool your seat cushion, p ...
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor
•
Removal of the airbag must be performed according to the precautions / procedures described previously.
•
...
Tightening Torques
Item
N.m
kgf.m
lb-ft
Ignition coil mounting bolt
9.8 ~ 11.8
1.0 ~ 1.2
7.2 ~ 8.7
Spark plug
14.7 ~ 24.5
1.5 ~ 2. ...