Kia Soul: Repair procedures
Removal |
1. |
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim") |
2. |
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel") |
3. |
Remove the back view camera (A) after loosening the mounting screws. |
Installation |
1. |
Install the back view camera. |
2. |
Install the tailgate back panel and tailgate trim. |
Description and Operation
Description
Back view camera will activate when the backup light is ON with the ignition switch ON and the shift lever in the R position.
This supplemental system shows the back of the vehicle on ...
See also:
High Voltage Battery Heater Relay Description and Operation
Description
High Voltage Battery Heater Relay is installed in the Power Relay Assembly (PRA).
It supplies high voltage flow inside the heater to operate the heater to warm the high voltage battery ...
Mode Control Actuator Description and Operation
Description
Located in the heater unit, the mode control actuator adjusts
the position of the mode door by operating the mode control actuator
according to the signal from the A/C control unit. ...
Manual transaxle fluid (if equipped)
Inspect the manual transaxle fluid according to the maintenance schedule.
✽ NOTICE
Automatic transaxle fluid color is basically red. As the vehicle is driven,
the automatic transaxle fluid ...