Kia Soul: Repair procedures - Fender - Body (Interior and Exterior)Kia Soul: Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Fender / Repair procedures

Replacement
   
Be careful not to damage the fender and body.
   
When removing the clips, use a clip remover.
1.
Remove the head lamps.
(Refer to Body Electrical System - "Head Lamps")
2.
Remove the A pillar garnish.
(Refer to Body Side Moulding - "A Pillar Garnish")
3.
Remove the side sill moulding.
(Refer to Body Side Moulding - "Side Sill Moulding")
4.
Using a clip remover, detach the clip, and remove the A pillar guard (A).

5.
Detach the clips and then remove the insulator pad (A).

6.
Loosen the front wheel guard mounting screws and bolt.

7.
Remove the front bumper side bracket (A) after loosening the screw and bolt.

8.
After loosening the mounting bolts and nuts, remove the fender assembly (A).

9.
Install in the reverse order of removal.
   
Make sure that the connectors are plugged in properly.
Replace any damaged clips.
    Components and Components Location
    Component Location 1. Fender assembly ...

    See also:

    Curtain air bag
    Curtain air bags are located along both sides of the roof rails above the front and rear doors. They are designed to help protect the heads of the front seat occupants and the rear outboard s ...

    Passenger Airbag (PAB) Module Description and Operation
    Description Passenger Airbag (PAB) module is located in the passenger crash pad. The PAB contains 2 firing squibs of airbag and 1 firing squib of active vent. The deployment timing of both 2 fi ...

    Condition and operation in the front passenger occupant detection system
    *1) The system judges a person of adult size as an adult. When a smaller adult sits in the front passenger seat, the system may recognize him/her as a child depending on his/her physique and pos ...