Kia Soul: Removal - Horn - Body Electrical SystemKia Soul: Removal

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Horn / Removal

1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper cover.
(Refer to Body - "Front Bumper Cover")
3.
Remove the horn (B) after disconnecting the connector (A) and bolt.

    Component Location
    1. Horn switch 2. Horn relay (EMS box) 3. Horn 4. Clock spring ※ Horn relay is built in EMS box. ...

    Installation
    1. Install the horns after connecting the horn connectors. 2. Install the front bumper cover. ...

    See also:

    Blower OFF
    Push the OFF button to turn off the blower. However you can still operate the mode and air intake buttons as long as the ignition switch is in the position ON. ...

    Installation
    1. Connect the connectors and install the BCM. 2. Install the glove box housing and audio/AVN head unit. ...

    Rear Glass Installation
       • In order to mount the rear glass, use the tools shown in the following figure: ...