Kia Soul: Removal - Clutch Tube - Clutch System - Kia Soul 2014-2019 PS Service ManualKia Soul: Removal

Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Clutch System / Clutch Tube / Removal

1.
Remove the air cleaner assembly.
G 1.6 GDI (Refer to Engine Mechanical System - "Air Cleaner")
G 2.0 GDI (Refer to Engine Mechanical System - "Air Cleaner")
2.
Remove the battery & tray.
G 1.6 GDI (Refer to Engine Electrical System - "Battery")
G 2.0 GDI (Refer to Engine Electrical System - "Battery")
3.
Disconnect the clutch tube (B) and reservoir hose (A) from the clutch master cylinder.
  
Do not spill brake fluid on the vehicle; it may damage the paint if brake fluid does contact the paint, wash it off immediately with water.

4.
Loosen the clutch tube bracket bolts (A).

5.
Remove the clutch tube (A) after removing the release cylinder assembly (B).

    Components
    1. Clutch pedal assembly 2. Ignition lock and clutch switch 3. Master cylinder 4. Clutch tube ...

    Installation
       When installing, O-rings of clutch tube should be replaced with a new one. 1. Install i ...

    See also:

    Control Cable Inspection
    1. Check the select cable for proper operation and for damage. 2. Check the shift cable for proper operation and for damage. ...

    Output Speed Sensor. Inspection
    1. Check signal waveform of Input & output speed sensor using the GDS. Specification: Refer to "Signal Wave Form" section. ...

    Manifold Absolute Pressure Sensor (MAPS). Description and Operation
    Description Manifold Absolute Pressure Sensor (MAPS) is a speed-density type sensor and is installed on the surge tank. It senses absolute pressure of the surge tank and transfers the analog ...