Kia Soul: Rear Wheel Guard Repair procedures - Body Side Moulding - Body (Interior and Exterior)Kia Soul: Rear Wheel Guard Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Body Side Moulding / Rear Wheel Guard Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Take care not to scratch the body surface.
1.
Remove the rear tire.
2.
After loosening the mounting clips and screws, remove the front wheel guard (A).

3.
Install in the reverse order of removal.
   
•
Replace any damaged clips.
    Front Wheel Guard Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    Side Sill Moulding Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...

    See also:

    ESC OFF Switch. Removal
    1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer to Body - &q ...

    Component Location
    1. Horn switch 2. Horn relay (EMS box) 3. Horn 4. Clock spring ※ Horn relay is built in EMS box. ...

    Trailer towing
    We do not recommend using this vehicle for trailer towing. ...