| •
|
Put on gloves to protect your hands.
|
|
| •
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related
parts, to prevent damage.
|
| •
|
Use a plastic panel removal tool to remove interior trim
pieces to protect from marring the surface.
|
| •
|
Take care not to bend or scratch the trim and panels.
|
|
|
1. |
Remove the rear seat back cover [LH]or [RH].
(Refer to Rear Seat - "Rear Seat Back Cover")
|
|
2. |
After loosening the mounting screws, then remove the rear seat
folding lever (A).
|
|
3. |
Remove the rear seat latch rod (A) to direction of the arrow.
|
|
4. |
Install in the reverse order of removal.
|
1. Rear seat folding lever
...
See also:
Power Door Lock Switch Installation
1.
Install the power window switch assembly.
2.
Install the front door trim after connect the connector.
...
Distributing the sealant
11. Immediately drive approximately 4~6miles (7~10km or, about 10min) to evenly
distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not fall below a speed ...
Description
Limitations Of The Navigation system
GPS Signal Reception State
As the GPS satellite frequency is received/transmitted in straight
lines, reception may not work if hiding devices a ...
Kia Soul: Rear Seat Folding Lever Replacement
Rear Seat Folding Lever Component Location
Rear Seat Belt