Kia Soul: Rear Pillar Trim Repair procedures - Interior Trim - Body (Interior and Exterior)Kia Soul: Rear Pillar Trim Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Pillar Trim Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim")
2.
After loosening the mounting bolts, remove the rear pillar trim (A).

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
    Rear Pillar Trim Components and Components Location
    Component Location 1. Rear pillar trim ...

    Mirror
    ...

    See also:

    Water Jacket Seperator Remove and Installation
    1. Remove the cylinder head assembly. (Refet to Cylinder Head Assembly - "Cylinder Head") 2. Remove the water jacket seperator ...

    Photo Sensor Repair procedures
    Inspection 1. Turn the ignition switch ON. 2. Connect the GDS. 3. Emit intensive light toward the photo sensor using a lamp, and check the output voltage change. 4. The voltage will ri ...

    Component Location
    1. Driver power window main switch 2. BCM (Body Control Module) 3. Door lock switch 4. Front door lock actuator & switch 5. Rear door lock actuator & ...