Kia Soul: Rear Glass Defogger Switch Inspection
| 1. |
The windshield deicer switch inputs can be checked using the
GDS.
|
| 2. |
To check the input value of windshield deicer switch, select
option "Body Control Module".
|
| 3. |
Select option "Current Data".
|
| 4. |
To perform functional test on SJB outputs, select "Actuation
Test".
|
Rear Glass Defogger Printed Heater Inspection
Wrap tin foil around the end of the voltmeter test lead to
prevent damaging the heater line. Apply finger ...
Rear Glass Defogger Switch Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the heater and A/C control unit.
(Refer to Heating, Ventila ...
See also:
To resume cruising speed at more than approximately 25 mph (40 km/h)
If any method other than the CRUISE ON-OFF switch was used to cancel cruising
speed and the system is still activated, the most recent set speed will automatically
resume when the RES+ switch is ...
Evaporator Temperature Sensor Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the evaporator temperature sensor connector.
3.
Measure the resistance between terminals "1" and "2" of the evaporator temperature ...
Description and Operation
Description
Limitations of the Navigation System
GPS Signal Reception State
As the GPS satellite frequency is received/transmitted in
straight lines, reception may not work if hiding devices ar ...