Kia Soul: Rear Door Belt Outside Weatherstrip Replacement
Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Outside Weatherstrip Replacement
| 1. |
Pull down rear door window glass by pressing the power window
glass switch.
|
| 2. |
After loosening the mounting screws, then remove the rear door
belt outside weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Latch Replacement
1.
Remove the rear door module.
(Refer to Rear Door - "Rear Door Module")
2.
Remove the rear door outside handle base (A) by p ...
Rear Door Belt Inside Weatherstrip Replacement
1.
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
2.
Remove the rear door belt inside weatherstrip (A).
...
See also:
Purge Control Solenoid Valve (PCSV). Description and Operation
Description
Purge Control Solenoid Valve (PCSV) is installed on the surge tank and
controls the passage between the canister and the intake manifold. It is a solenoid
valve and is open when ...
Input Speed Sensor. Removal
1.
Remove the valve body assembly.
(Refer to Hydraulic System - "Valve Body")
2.
Disconnect the input & output speed senso ...
Photo Sensor Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lam ...