Kia Soul: Rear Door Belt Inside Weatherstrip Replacement
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Body (Interior and Exterior) / Rear Door / Rear Door Belt Inside Weatherstrip Replacement
| 1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim")
|
| 2. |
Remove the rear door belt inside weatherstrip (A).
|
| 3. |
Install in the reverse order of removal.
|
Rear Door Belt Outside Weatherstrip Replacement
1.
Pull down rear door window glass by pressing the power window
glass switch.
2.
After loosening the mounting screws, then remove the rear ...
Rear Door Side Weatherstrip Replacement
1.
Loosen the rear door checker (B) mounting bolt.
Tightening torque :
16.7 ~ 21.6 N.m (1.7 ~ 2.2 kgf.m, 12.3 ~ 15.9 lb-ft)
...
See also:
Exhaust Manifold Removal and Installation
1.
Remove the engine cover.
2.
Disconnect the battery negative terminal.
3.
Disconnect the front and rear oxyg ...
If engine turns over normally but does not start
1.Check the fuel level.
2.With the ignition switch in the LOCK position, check all connectors at the
ignition coils and spark plugs. Reconnect any that may be disconnected or loose.
3.Check the fu ...
Components
1. Clutch release fork
2. Clutch cover assembly
3. Clutch disk assembly
4. Clutch release bearing
...