Kia Soul: Rear Disc Brake. Installation
Brake caliper assembly
| 1. |
Install in the reverse order of removal.
|
| 2. |
Rotate the caliper piston and push the direction of the arrow.
|
| 3. |
After installation, bleed the brake system. (Refer to Brake system
bleeding)
|
Rear Wheel Brake disc
| 1. |
Install in the reverse order of removal.
|
| 2. |
Rotate the caliper piston and push the direction of the arrow.
|
Rear Disc Brake. Inspection
Rear brake disc thickness check
1.
Check the brake pads for wear and fade.
2.
Check the brake disc for damage and cracks.
...
See also:
Jump starting
Jump starting can be dangerous if done incorrectly. Therefore, to avoid harm
to yourself or damage to your vehicle or battery, follow these jump starting procedures.
If in doubt, we strongly recom ...
Air cleaner
Filter replacement
It must be replaced when necessary, and should not be washed.
You can clean the filter when inspecting the air cleaner element.
Clean the filter by using compressed air.
1. ...
Fog Lamps Inspection
Fog Lamp Switch
1.
With the fog lamp switch in each position, make sure that
continuity exists between the terminals below. If continuity is
not as speci ...