Kia Soul: Rear Cross-traffic Collision Warning (RCCW) system / Rear Cross-traffic Collision-avoidance 
Assist (RCCA) system - Driving your vehicleKia Soul: Rear Cross-traffic Collision Warning (RCCW) system / Rear Cross-traffic Collision-avoidance Assist (RCCA) system

Kia Soul (SK3) 2020-2020 Owners Manual / Driving your vehicle / Rear Cross-traffic Collision Warning (RCCW) system / Rear Cross-traffic Collision-avoidance Assist (RCCA) system

System description

Rear Crosstraffic Collision Warning (RCCW) system

Kia Soul. Assist (RCCA) system

Rear Cross-Traffic Collision Warning (RCCW) System uses radar sensors to monitor the approaching cross traffic from the left and right side of the vehicle when your vehicle is in reverse.

The blind spot detection range varies relative to the approaching vehicle speed.

Rear Cross-traffic Collisionavoidance Assist (RCCA) system

Rear Cross-Traffic Collision-Avoidance Assist (RCCA) System monitors approaching cross traffic from the left and right side of the vehicle when your vehicle is approaching.

Rear Cross-Traffic Collision-Avoidance Assist (RCCA) System may activate the Electronic Stability Control (ESC) in accordance with a colliding possibility with an approaching vehicle. It is to lower the colliding risk or mitigate the colliding damage.

WARNING

  • Always be aware of road conditions while driving and be alert for unexpected situations even though Rear Cross-Traffic Collision Warning System and Rear Cross-Traffic Collision-Avoidance Assist System are operating.
  • Rear Cross-Traffic Collision Warning System and Rear Cross-Traffic Collision-Avoidance Assist System are supplemental systems to assist you. Do not entirely rely on the systems. Always pay attention, while driving, for your safety.
  • Rear Cross-Traffic Collision Warning System and Rear Cross-Traffic Collision-Avoidance Assist System are not substitutes for proper and safe driving. Always drive safely and use caution when backing up the vehicle.
BCW (Blind-Spot Collision Warning) (if equipped)
Operating conditions The indicator on the switch will illuminate when the BCW button is pressed with the engine start/stop button ON. If the vehicle speed exceeds 30 km/h (18.6 mph), the system ...

System setting and activation
System setting The driver can activate the systems by placing the ignition switch to the ON position and by selecting "User Settings Driver assistance Blind-spot safety Rear Cross- Traf ...

See also:

USB charger
The USB car charger allows drivers to charge their digital devices like smartphone, and PC tablets. Connect the cable to the USB port, charging will begin. The USB car charger is available with e ...

Rear Bumper Beam Assembly Components and Components Location
Component Location 1. Rear bumper beam assembly ...

Paddle shifter
The paddle shift function is available when the shift lever is in the D (Drive) position or the manual mode. With the shift lever in the D position The paddle shift function will operate when t ...