Kia Soul: Rear Console Cover Repair procedures - Floor Console - Body (Interior and Exterior)Kia Soul: Rear Console Cover Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Floor Console / Rear Console Cover Repair procedures

Replacement
   
•
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Loosen the rear console cover mounting screws (A).

3.
Using a screwdriver or remover, remove the rear console cover (A).

4.
Install in the reverse order of removal.
   
•
Make sure that the connectors are plugged in properly.
•
Replace any damaged clips.
    Rear Console Cover Components and Components Location
    Component Location 1. Rear console cover ...

    Console Armrest Components and Components Location
    Component Location 1. Console armrest ...

    See also:

    Tail Gate Weatherstrip Replacement
    1. Remove the tail gate weatherstrip (A).    • ...

    Hood Insulator Pad Replacement
    1. Using a clip remover, detach the clips, and remove the hood insulator pad (A).    ...

    Front Wiper Motor Component Location
    1. Cap 2. Nut 3. Wiper arm & blade 4. Rivet 5. Cowl top cover 6. Bolt 7. Wiper motor & linkage assembly ...