Kia Soul: Rear Combination Lamp Repair procedures - Lighting System - Body Electrical SystemKia Soul: Rear Combination Lamp Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / Rear Combination Lamp Repair procedures

Removal
Rear Combination Lamp
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp (A) after loosening the mounting screws.

3.
Disconnect the rear combination lamp connector (A).

Turn Signal Lamp Bulb
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp assembly.
3.
Remove the turn signal lamp socket (A) by turning the socket counterclockwise.

4.
Remove the turn signal lamp bulb (A).

Back Up Lamp Bulb
1.
Disconnect the negative (-) battery terminal.
2.
Remove the rear combination lamp assembly.
3.
Remove the back up lamp socket (A) by turning the socket counterclockwise.

4.
Remove the back up lamp bulb (A).

Installation
1.
Install the rear combination lamp assembly.
2.
Connect the negative (-) battery terminal.
    Luggage Lamp Repair procedures
    Removal 1. Disconnect the negative (-) battery terminal. 2. Using a screwdriver or remover, remove the luggage lamp (A). 3. Remove the luggage lamp (A) after disconnecting the connector (B ...

    See also:

    Rear Pillar Trim Components and Components Location
    Component Location 1. Rear pillar trim ...

    Front Seat Shield Outer Cover Component Location
    1. Front seat shield outer cover ...

    High Voltage Battery Heater Relay Description and Operation
    Description High Voltage Battery Heater Relay is installed in the Power Relay Assembly (PRA). It supplies high voltage flow inside the heater to operate the heater to warm the high voltage battery ...