Kia Soul: Rear Bumper
- Components
- Rear Bumper Cover Component Location
- Rear Bumper Cover Replacement
- Rear Bumper Beam Assembly Component Location
- Rear Bumper Beam Assembly Replacement
Installtion
1. With a putt knife, scrape the old adhesive smooth to a thickness of about 2mm (0.08 in.) on the bonding surface around the entire quarter fixed glass flange. ...Components
1. Rear bumper cover 2. Rear bumper side bracket ...See also:
Fuel Tank Pressure Sensor (FTPS). Description and Operation
Description
Fuel Tank Pressure Sensor (FTPS) is a component of the evaporative emission
control system and is installed on the fuel tank, the fuel pump, or the canister.
It checks the purge ...
Side repeater light bulb Type A replacement (if equipped)
1. Remove the light assembly from the vehicle by prying the lens and pulling
the assembly out.
2. Disconnect the bulb electrical connector.
3. Separate the socket and the lens parts by turning ...
Inspection
1.
Uplift the vehicle with lift.
2.
Remove the under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
...