Kia Soul: Radiator Grill Repair procedures - Front Bumper - Body (Interior and Exterior)Kia Soul: Radiator Grill Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Remove the charge door opener cover.
(Refer to body -"charge door opener cover" )
3.
Loosen the screws and then remove radiator grill.

4.
Install in the reverse order of removal.
   
Replace the damaged clip.
    Radiator Grill Components and Components Location
    Component Location 1. Radiator grill ...

    See also:

    Light bulb position (Rear)
    1. Tail lamp (Bulb type) 2. Tail and stop lamp (Bulb type) 3. Rear turn signal lamp (Bulb type) 4. Back-up lamp (Bulb type) 5. Tail lamp (LED type) 6. Stop lamp (LED type) 7. License plate ...

    Front Body
    Front Body A * These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Front Body B * These dimensions indicated in th ...

    Front Seat Frame Assembly Repair procedures
    Replacement     • Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protec ...