Kia Soul: PWM Blower Module Repair procedures - Blower - Heating,Ventilation, Air ConditioningKia Soul: PWM Blower Module Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Heating,Ventilation, Air Conditioning / Blower / PWM Blower Module Repair procedures

Inspection
1.
Turn the ignition switch OFF.
2.
Manually operate the control switch and measure the voltage of blower motor.
3.
Select the control switch to raise voltage until high speed.

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the glove box housing.
(Refer to Body - "Glove Box Housing")
3.
Disconnect the connector (A) and then remove the blower resistor (B) after loosening the mounting screws.

4.
Install in the reverse order of removal.
    Blower Motor Repair procedures
    Inspection 1. Connect the battery voltage and check for the blower motor rotation. 2. If the blower motor voltage does not operate well, substitute with a verified blower motor and check for p ...

    Climate Control Air Filter Description and Operation
    Description The climate control air filter is located in the blower unit. It eliminates foreign materials and odor. The particle filter performs a role as an odor filter as well as a conventio ...

    See also:

    Trip interruption
    Trip interruption expense benefits are provided in the event that a warranty-related disablement occurs more than 150 miles from your home, and the repairs require more than 24 hours to complete. ...

    Smart Key Unit Installation
    Smart Key Unit 1. Install the smart key unit. 2. Connect the connector and install the smart key unit. ...

    Valve Body. Removal
    1. Remove the under cover. (Refer to Engine Mechanical System - "Engine Room Under Cover") 2. Remove the drain plug (A) and dr ...