Kia Soul: Pressure Source Unit Components and Components Location - AHB(Active Hydraulic Boost) System - Brake SystemKia Soul: Pressure Source Unit Components and Components Location

Kia Soul EV (PS EV) 2015-2020 Service Manual / Brake System / AHB(Active Hydraulic Boost) System / Pressure Source Unit Components and Components Location

Components

   
PSU must not be disassembled.
1. Motor connector
2. Bracket
3. Block
4. Accumulator
5. Damper
6. Motor





    Brake Actuation Unit Repair procedures
    Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.   ...

    Pressure Source Unit Repair procedures
    Removal 1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Disconnect the brake fluid level switch connector (A), and remove the reservoir cap.   ...

    See also:

    Audio Unit Repair procedures
    Removal     Put on gloves to protect your hands.     • When prying with a flat-tip screwdriver, wrap it with protective tape, and ap ...

    LCD Display Control
    The LCD Display modes can be changed by using the control buttons on the steering wheel. 1. : MODE button for change the LCD MODES 2.: MOVE scroll switch for select the items 3. OK : SET/RE ...

    Audio system
    If you install aftermarket HID head lamps, your vehicle’s audio and electronic devices may malfunction. ...