Kia Soul: Power Electric Frame Repair procedures - Front Suspension System - Suspension SystemKia Soul: Power Electric Frame Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Suspension System / Front Suspension System / Power Electric Frame Repair procedures

Removal
1.
Remove the motor & gear drive unit.
(Refer to Traction Motor System - "Motor & Gear Differential Unit Assembly")
2.
Remove the Electric Water Pump (EWP).
(Refer to Traction Motor System - "Electric Water Pump")
3.
Remove the accumulator mounting bolt (A).

Tightening torque :
6.8 ~ 10.7 N.m(0.7 ~ 1.1 kgf.m, 5.0 ~ 7.9 lb-ft)

4.
Remove the wiring (A) from the power electric frame.

5.
Remove the LH & RH support bracket mounting nut (A,B) and then remove the Power Electric Frame (A).

Tightening torque
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

6.
Install in the reverse order of removal.
    Sub Frame Repair procedures
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Loosen the bolt (A) and then disconnect the universal joint assembly from the pin ...

    See also:

    Auto Light Sensor Inspection
    In the state of IGN1 ON, when the multi function switch module detects auto light switch on, tail lamp relay output and head lamp low relay output are controlled according to auto light se ...

    High Pressure Fuel Pump. Repair procedures
    Removal    ...

    Specifications
    Specifications ItemSpecificationFront disc brakeTypeVentilated discDisc O.D.O 300 mm (11.81 in)Disc thickness28 mm (1.10 in)Caliper pistonSingleCylinder I.D.O 60.6 mm (2.36 in)Rear disc brakeType ...