Kia Soul: Power Door Lock Switch Repair procedures - Power Door Locks - Body Electrical SystemKia Soul: Power Door Lock Switch Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Switch Repair procedures

Diagnosis With GDS
1.
The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes.
It will be able to quickly diagnose power door lock/unlock defects with GDS. GDS can operate the actuator forcefully, monitor input/output values and self diagnose.
2.
To diagnose the SJB function, select the vehicle model, BCM and DDM.
3.
Select "Input/output monitoring" if you wish to check the current data of power door lock system. This menu provides input/output status of DDM.

4.
To perform functional test on SJB outputs, select "Actuation Test".

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
3.
Remove the power window switch assembly (A) by loosening the mounting screws (8EA).

4.
Remove the power window switch (A) after loosening the mounting screws (4EA).

Installation
1.
Install the power window switch assembly.
2.
Install the front door trim after connecting the connector.
    Power Door Lock Actuators Repair procedures
    Inspection Front Door Lock Module Inspection 1. Remove the front door trim. (Refer to Body - "Front Door Trim") 2. Remove the front door module. (Refer to Body - "Front Door Module") 3. ...

    See also:

    Disassembly
    1. Loosen the screw (A-6ea) and then remove the lower cover (B) from the steering wheel body. 2. Remove the wiring (A) & Heated ...

    Special Service Tools
    Special Service Tools Tool Name / NumberIllustrationDescriptionRKE Battery Checker09954-2P100Used to measure the RKE battery voltage ...

    Dimensions.Engine
    Dimensions Engine ...