Kia Soul: Power Door Lock Actuators Repair procedures - Power Door Locks - Body Electrical SystemKia Soul: Power Door Lock Actuators Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Power Door Locks / Power Door Lock Actuators Repair procedures

Inspection
Front Door Lock Module Inspection
1.
Remove the front door trim.
(Refer to Body - "Front Door Trim")
2.
Remove the front door module.
(Refer to Body - "Front Door Module")
3.
Disconnect the connectors from the actuator.

4.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

[Central Lock]

5.
Check for continuity between the terminals in each switch position according to the table.

Rear Door Lock Module Inspection
1.
Remove the rear door trim.
(Refer to Body - "Rear Door Trim")
2.
Remove the rear door module.
(Refer to Body - "Rear Door Module")
3.
Disconnect the connectors from the actuator.

4.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

[Central Lock]

5.
Check for continuity between the terminals in each switch position according to the table.

Tailgate Lock Module Inspection
1.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
2.
Disconnect the 4P connector from the actuator.

3.
Check actuator operation by connecting power and ground according to the table. To prevent damage to the actuator, apply battery voltage only momentarily.

Tailgate Open Switch
1.
Remove the tailgate trim.
(Refer to Body - "Tailgate Trim")
2.
Disconnect the connector from the actuator.

3.
Check for continuity between the terminals in each switch position according to the table.

Hood Switch
1.
Disconnect the connector (A) and bolts from the hood switch.

2.
Check for continuity between the terminals and ground according to the table.

    Components and Components Location
    Component Location 1. Driver power window main switch2. BCM (Body Control Module)3. Door lock switch4. Front door lock actuator & switch5. Rear door lock actuator & switch6. Tailgate lock ...

    Power Door Lock Switch Repair procedures
    Diagnosis With GDS 1. The BCM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. It will be able to quickly diagnose ...

    See also:

    High beam indicator light, High beam assist indicator
    High beam indicator light This indicator light illuminates: When the headlights are on and in the high beam position When the turn signal lever is pulled into the Flash-to-Pass position. H ...

    Highway driving
    Tires Adjust the tire inflation pressures to specification. Low tire inflation pressures will result in overheating and possible failure of the tires. Avoid using worn or damaged tires which may r ...

    Side Impact Sensor (SIS) Components and Components Location
    Components ...