Kia Soul: Photo Sensor Repair procedures - Air Conditioning System - Heating,Ventilation, Air ConditioningKia Soul: Photo Sensor Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Heating,Ventilation, Air Conditioning / Air Conditioning System / Photo Sensor Repair procedures

Inspection
1.
Turn the ignition switch ON.
2.
Connect the GDS.
3.
Emit intensive light toward the photo sensor using a lamp, and check the output voltage change.
4.
The voltage will rise with higher intensive light and reduce with lower intensive light.

1. Auto Light Signal
2. Auto Light Signal Signal
3. Photo Signal (RH)
4. Led power (BAT)
5. Led GND (To BCM)
6. Photo Signal (LH)
7. Photo Power (SW)
8. 5V (Vcc)

Replacement
1.
Disconnect the negative (-) battery terminal.
2.
With the (-) driver, remove the photo sensor (A) from the center of the defrost nozzle.

3.
Install in the reverse order of removal.
    Photo Sensor Description and Operation
    Description The photo sensor is located at the center of the defrost nozzles. The photo sensor contains a photovoltaic (sensitive to sunlight) diode. The solar radiation received by its light r ...

    Ambient Temperature Sensor Description and Operation
    Description The ambient temperature sensor is located at the front of the condenser and detects ambient air temperature. It is a negative type thermistor; resistance will increase with lower te ...

    See also:

    Specifications
    Transaxle type M6CF1 Engine type Gasoline 1.6 GDI Gear ratio 1st 3.615 2nd 1.955 3rd 1.286 ...

    Side Sill Moulding Replacement
       • Put on gloves to protect your hands. ...

    Floor mat anchor(s)
    When using a floor mat on the front floor carpet, make sure it attaches to the floor mat anchor(s) in your vehicle. This keeps the floor mat from sliding forward. WARNING - After market floor mat ...