Kia Soul: Parking Brake Cable. Installation - Parking Brake System - Brake SystemKia Soul: Parking Brake Cable. Installation

Kia Soul 2014-2019 PS Service Manual / Brake System / Parking Brake System / Parking Brake Cable. Installation

1.
Install the parking brake cable (A).

Tightening torque :
19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m, 14.5 ~ 21.7 lb-ft)

2.
Install the parking brake cable (A), and then install the clip (B).

3.
Install the parking brake cable (B).

4.
Install the parking brake cable adjuster, then adjust the parking brake lever stroke by turning adjusting nut (A).

Parking brake lever stroke:
5 ~ 7 clicks (Pull the lever with 196N (20 kgf, 44 lbf))

5.
Release the parking brake lever fully, and check that parking brakes do not drag when the rear wheels are turned. Readjust if necessary.
6.
Make sure that the parking brakes are fully applied when the parking brake lever is pulled up fully.
7.
Install the rear console cover (A).

8.
Install the rear tire and wheel.

Tightening torque :
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)

    Parking Brake Cable. Removal
       The parking brake cables must not be bent or distorted. This will lead to stiff operation and premature failure. ...

    Parking Brake Cable. Adjustment
    Parking Brake Lever Stroke Adjustment 1. Remove the rear console cover (A). 2. Apply the brake pedal 20 times with the force of 10kg ...

    See also:

    Accelerator Pedal. Repair procedures
    Removal 1. Turn the ignition switch OFF and disconnect the negative (-) battery cable. ...

    Headrest
    The rear seat(s) is equipped with headrests in all the seating positions for the occupant's safety and comfort. The headrest not only provides comfort for passengers, but also helps protect ...

    Inspection
    W/Harness Inspection 1. Check the vehicle speed sensor by using the scan tool. (if normal, current vehicle speed is display) 2. Chec ...