Kia Soul: Parking Assist Sensor Repair procedures - Parking Assist System - Body Electrical SystemKia Soul: Parking Assist Sensor Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Parking Assist System / Parking Assist Sensor Repair procedures

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front/rear bumper cover.
(Refer to Body - "Front Bumper Cover")
(Refer to Body - "Rear Bumper Cover")
3.
Disconnect the connector (A) from the ultrasonic sensor.
[Front sensor, Rear center sensor]

[Rear side sensor]

4.
Pull out ths ultrasonic sensor (A) by opening the sensor holder out.
[Front sensor, Rear center sensor]

[Rear side sensor]

Installation
1.
Install the PAS sensor and connector.
2.
Install the front/rear bumper cover.
    See also:

    Troubleshooting
    Troubleshooting SymptomPossible causeRemedyOnly one lamp lights on(All exterior lamps)Bulb burned outReplace bulbSocket, wiring or ground faultyRepair if necessaryHead lamps do not light onBulb b ...

    Cooling Fan Specifications
    Item Specification Motor capacity (W) 140 (With A/C) 120 (Without A/C) Fan type Puller Puller Fan speed control ...

    Sunvisor
    Use the sunvisor to shield direct light through the front or side windows. To use the sunvisor, pull it downward. To use the sunvisor for the side window, pull it downward, unsnap it from the b ...