Kia Soul: Overhead Console Lamp Repair procedures - Lighting System - Body Electrical SystemKia Soul: Overhead Console Lamp Repair procedures

Kia Soul EV (PS EV) 2015-2020 Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Repair procedures

Inspection
1.
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch.

No.
Description
1
Ground (-)
2
Door (-)
3
Room/ Door (-)
4
Battery (+)

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the mounting screws (2EA) and then remove the overhead console (A).

3.
Remove the overhead console after disconnecting the connectors (A).

4.
If it is necessary to replace the bulb, replace the bulb (in the following order).
(1)
Remove the overhead console lens (A).

(2)
Remove the bulb (A).

Installation
1.
Install the overhead console lamp after connecting the connector.
2.
Install the lens after tightening 2 screws.
    Room Lamp Repair procedures
    Inspection 1. Check that the switch operates properly after disconnecting the room lamp connector (A). Room Lamp Removal Room Lamp 1. Disconnect the negative (-) battery terminal. 2. De ...

    Hazard Lamp Switch Repair procedures
    Inspection 1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to quickly diagnose defects ...

    See also:

    Parking brake
    Checking the parking brake Check the stroke of the parking brake by counting the number of “clicks’’ heard while fully applying it from the released position. Also, the parking brake alone ...

    Sunvisor
    Use the sunvisor to shield direct light through the front or side windows. To use the sunvisor, pull it downward. To use the sunvisor for the side window, pull it downward, unsnap it from the br ...

    Front Stabilizer Link Repair procedures
    Replacement 1. Loosen the wheel nuts slightly. Raise the vehicle, and make sure it is securely supported. 2. Remove the front wheel and tire (A) from front hub. Tightening torque : 88.3 ...