Kia Soul: Overhead Console Lamp Installation - Lighting System - Body Electrical SystemKia Soul: Overhead Console Lamp Installation

Kia Soul 2014-2019 PS Service Manual / Body Electrical System / Lighting System / Overhead Console Lamp Installation

1.
Install the overhead console lamp after connecting the connector.
2.
Install the lens after tightening 2 screws.
    Overhead Console Lamp Removal
    1. Disconnect the negative (-) battery terminal. 2. Remove the mounting screws (2EA). And then remove the overhead con ...

    Hazard Lamp Switch Inspection
    1. The SJB can be diagnosed by using the GDS. The SJB communicates with the GDS which then displays inputs and outputs along with codes. It will be able to ...

    See also:

    CVVT & Camshaft Inspection
    Camshaft 1. Measure the height of the cam lobe using a micrometer and check the surface of the cam lob for wear and tear. If necessary, replace the camshaft. ...

    Crankshaft Position Sensor (CKPS). Description and Operation
    Description Crankshaft Position Sensor (CKPS) detects the crankshaft position and is one of the most important sensors of the engine control system. If there is no CKPS signal input, the eng ...

    Compressor Description
    The compressor is the power unit of the A/C system. It is located on the side of engine block and driven by a V-belt of the engine. The compressor changes low pressure and low temperatur ...