Kia Soul: Output Speed Sensor. Installation - Automatic Transaxle Control System - Automatic Transaxle SystemKia Soul: Output Speed Sensor. Installation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Installation

1.
Install in the reverse order of removal.
  
Adding Automatic Transaxle Fluid(ATF).
(Refer to Hydraulic System - "Fluid")
Use new valve body gasket (A).

    Output Speed Sensor. Removal
    1. Remove the valve body assembly. (Refer to Hydraulic System - "Valve Body") 2. Disconnect the input & output speed senso ...

    Torque Converter Control Solenoid Valve (T/CON_VFS). Description
    Torque converter control solenoid valve (T/CON) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the torque converter. ...

    See also:

    In case of an emergency while driving
    If the engine stalls at a crossroad or crossing If the engine stalls at a crossroad or crossing, set the shift lever in the N (Neutral) position and then push the vehicle to a safe place. If you h ...

    26 Brake Control Solenoid Valve(26/B_VFS). Specifications
    Direct control VFS[26/B] ▷ Control type : Normal low type Control Pressure kpa (kgf/cm², psi) 9.81 ~ 500.14 (0.1 ~ 5.1, 1.42 ~ 72.54) Current value(mA) ...

    Auto Light Sensor Installation
    1. Reconnect the auto light connector. 2. Install the auto light sensor. ...