Kia Soul: Output Speed Sensor. Description
Second generation PS (2014-2019) / Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Output Speed Sensor. Description
The output speed sensor is a vital unit that measures the rate of rotation
of the transaxle's turbine shaft and output shaft, and delivers the readings
to the TCM. The sensor provides critical input data that's used in feedback
control, damper clutch control, gear setting control, line pressure control,
clutch activation pressure control, and sensor fault analysis.
Input Speed Sensor. Installation
1.
Install in the reverse order of removal.
•
...
Output Speed Sensor. Specifications
▷ Type: Hall effect sensor
Operation condition (°C)°F
((-)40 ~ 150)) -40 ~ 302
Air gap(mm)in.
(0.85 ~ 1.3) 0.0335 ~ 0.0512
Output voltage
...
See also:
ESC Control Module. Removal
1.
Turn ignition switch OFF and disconnect the negative (-) battery
cable.
2.
Remove the ECM.
(Refer to Engine Control / Fuel Syst ...
Vapor hose and fuel filler cap
The vapor hose and fuel filler cap should be inspected at those intervals specified
in the maintenance schedule. Make sure that a new vapor hose or fuel filler cap
is correctly replaced. ...
Compressor Installation
1.
Make sure the compressor (A) mounting bolt with the correct length
is screwed in. Tighten the mounting bolts with the specified tightening
order.
...