Kia Soul: Oil Pump Removal and Installation - Lubrication System - Engine Mechanical SystemKia Soul: Oil Pump Removal and Installation

Kia Soul 2014-2019 PS Service Manual / Engine Mechanical System / Lubrication System / Oil Pump Removal and Installation

1.
Remove the timing chain cover.
(Refer to Timing System - "Timing Chain Cover")
2.
Remove the pump cover (A).

Tightening torque :
8.8 ~ 13.7N.m (0.9 ~ 1.4kgf.m, 6.5 ~ 10.1 lb-ft)

3.
Remove the inner rotor (B) and outer rotor (C).

4.
Installation is in the reverse order of removal.
    Oil Pump Components
    1.  Timing chain cover 2.  Inner rotor 3.  Outer rotor 4.  Pump cover ...

    Oil Pressure Switch Removal and Installation
    1. Remove the under cover. 2. Remove the oil drain plug, and drain the oil into a container. 3. Remove the ...

    See also:

    Temperature Control Actuator
    The heater unit includes mode control actuator and temperature control actuator. The temperature control actuator is located at the heater unit. It regulates the temperature by the proced ...

    Components Location
    Supplemental Restraint System Control Module (SRSCM) Front Impact Sensor (FIS) Side Impact Sensor (SIS) Driver Airbag (DAB) / Passenger Ai ...

    Instrument Cluster Components and Components Location
    Components Connector Pin Information No.DescriptionNo.Description1Ground signal 3 (Power ground)21Trip switch (-) input2Illumination output (-)22Trip switch 1 (+) input(Trip button)3Rheostat swi ...