Kia Soul: Oil Pump. Operation - Hydraulic System - Automatic Transaxle SystemKia Soul: Oil Pump. Operation

Kia Soul 2014-2019 PS Service Manual / Automatic Transaxle System / Hydraulic System / Oil Pump. Operation

The oil pump is built-in as a single unit with the 26Brake chamber. Rotation of the pump builds the hydraulic pressure needed for the lubrication of the various parts of the transaxle and operation of the clutch and brakes. The oil also circulates through the torque converter and the cooler.

Operation flow

1. Inhale(Oil filter)
2. Inhale(Valve body)
3. Outlet
4. 26/B operation pressure
5. 35R/C operation pressure
6. Lubrication
7. Lock up clutch operation pressure
8. Lock up clutch cancellation

    Oil Pump. Components
    1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bush-Housing 7. Reaction shaft 8. Bush- Reaction shaft 9. Slee ...

    Fluid. Components Location
    1. Injection hole(eyebolt) 2. Fluid level plug 3. Fluid drain plug ...

    See also:

    Cooling Fan Description and Operation
    Description It controls the BLDC motor speed by the PWM signal of BMS ECU. ...

    Customer Complaint Analysis Check Sheet
    Troubleshooting (Flow chart type) There are six areas where a problem can occur: wiring harness, the radio, the USB/iPod, and speaker. Troubleshooting enables you to confine ...

    Inspection
    Check it by the procedure below to see if the function of the ECM is normal. 1. Turn the ignition key to the "ON" position. ...