Kia Soul: Occupant Detection System (ODS). Removal - SRSCM - RestraintKia Soul: Occupant Detection System (ODS). Removal

Kia Soul 2014-2019 PS Service Manual / Restraint / SRSCM / Occupant Detection System (ODS). Removal

1.
Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
2.
Remove the front passenger seat assembly.
(Refer to Body - "Front seat")
3.
Remove the front seat shield inner cover.
(Refer to Body - "Front seat shield inner cover")
4.
Remove the front seat shield outer cover.
(Refer to Body - "Front seat shield outer cover")
5.
After loosening the mounting bolts, then disconnect the front seat back assembly (A) and front seat cushion assembly (B).

Tightening torque :
44.1 ~ 53.9 N.m (4.5 ~ 5.5 kgf.m, 32.5 ~ 39.8 lb-ft)

    Occupant Detection System (ODS). Installation
    1. Install in the reverse order of removal. 2. Reconnect the battery negative cable. 3. After installing the OD ...

    See also:

    Pre-tensioner seat belt
    Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pretensioner is to make sure that the seat belts fit tightly against the occupan ...

    Wheel alignment and tire balance
    The wheels on your vehicle were aligned and balanced carefully at the factory to give you the longest tire life and best overall performance. In most cases, you will not need to have your wheels al ...

    Components
    1. Front seat belt pretensioner 2. Height adjuster 3. Rear seat belt retractor 4. Rear seat belt buckle [LH] 5. Rear seat belt buckle [RH] ...